Skip to main content

Default LED Modes

Overview

What do the "Default Led Mode" settings "Use Default LED Table 1", "Use Default LED Table 2", "Use Default LED Table 3" mean?  What is the behavior for the reader under each Default Led Mode.

Each of the "Default Led Mode" settings change how the reader responds base on the readers current setting and/or what is being requested.  For example "Use Default LED Table 1", if you unlock the portal, the reader light will go green for 2.9 seconds and then change to light off for 0.1 seconds.  Below you can find the standard settings from Mercury.

Note: If your reader does not support "Off" or "Amber", the color "Red" will be used.

Definitions

NameDescription
LED IDReader LED/buzzer function ID (1 to 8, or 11 to 16).  The function IDs correspond to the ACR mode, or the state of the door cycle.
On ColorColor to display during on_time
Off ColorColor to display during off_time
On TimeDuration to display on_color (.1sec/tick)
Off TimeDuration to display off_color (.1sec/tick)
Repeat CountIf transient, the number of times to repeat cycle.  Valid values are 1 to 255.
Beep CountIf transient, the number of times to beep.  Valid values are 0 to 15.
Description Text Line 1Text index of  LCD Text specified in Command 123 for Line1 (top)   (Zero to stay with current)
Description Text Line 2Text index of  LCD Text specified in Command 123 for Line2 (lower)   (Zero to stay with current)
ACR Mode or State of DoorThe Reader Mode or state of the door.  Ex. Unlocked, Locked, Card Only...

Default Setting for LED Mode Table 1

Led IDOn ColorOff ColorOn TimeOff TimeRepeat CountBeep CountDescription Text Line 1Description Text Line 2ACR Mode or State of Door
1RedOff29100LockedClockOff
2GreenOff29100UnlockedClockUnlocked
3RedOff29100LockedClockExit OK
4RedOff12900ReadyClockFacility Code Only
5RedOff12900ReadyClockCard Only
6GreenOff12900Enter PIN?.PIN Only
7RedOff12900ReadyClockCard & Pin
8GreenOff12900ReadyClockPIN or Card
11RedOff2253InvalidClockDeny
12GreenOff2271ValidClockAdmit
13GreenOff11402Enter Command?.User Command
14GreenRed1462Next Request?.2nd User (Card)
15GreenRed41252Enter Next Pin?.2nd User (PIN)
16GreenRed1462...ClockWait

Default Setting for LED Mode Table 2

Led IDOn ColorOff ColorOn TimeOff TimeRepeat CountBeep CountDescription Text Line 1Description Text Line 2ACR Mode or State of Door
1RedOff29100LockedClockOff
2GreenOff29100UnlockedClockUnlocked
3RedOff29100LockedClockExit OK
4RedOff24100ReadyClockFacility Code Only
5RedOff24100ReadyClockCard Only
6RedOff24100Enter PIN?.PIN Only
7RedOff24100ReadyClockCard & Pin
8RedOff24100ReadyClockPIN or Card
11RedOff2253InvalidClockDeny
12GreenOff2271ValidClockAdmit
13GreenOff11402Enter Command?.User Command
14GreenRed1462Next RequestClock2nd User (Card)
15GreenRed41252Enter Next Pin?.2nd User (PIN)
16GreenRed1462...ClockWait

Default Setting for LED Mode Table 3

Led IDOn ColorOff ColorOn TimeOff TimeRepeat CountBeep CountDescription Text Line 1Description Text Line 2ACR Mode or State of Door
1RedOff29100LockedClockOff
2GreenOff29100UnlockedClockUnlocked
3GreenOff29100LockedClockExit OK
4GreenOff29100ReadyClockFacility Code Only
5GreenOff29100ReadyClockCard Only
6GreenOff29100Enter PIN?.PIN Only
7GreenOff29100ReadyClockCard & Pin
8GreenOff29100ReadyClockPIN or Card
11RedOff2253InvalidClockDeny
12GreenOff2271ValidClockAdmit
13GreenOff11402Enter Command?.User Command
14GreenRed1462Next RequestClock2nd User (Card)
15GreenRed41252Enter Next Pin?.2nd User (PIN)
16GreenRed1462...ClockWait